Not sure. But i used mpls active + static route and got score
Printable View
This is bro.
no router bgp 1
commit
!
router bgp 65035
bgp confederation peers
65046
!
bgp confederation identifier 1
mpls activate
interface GigabitEthernet0/0/0/1
!
address-family ipv4 unicast
network 1.0.0.3/32
redistribute ospf 1
allocate-label all
!
address-family vpnv4 unicast
!
address-family ipv6 unicast
network 2001:db8:1::3/128
redistribute ospfv3 1
allocate-label all
!
address-family vpnv6 unicast
!
neighbor 1.0.0.5
remote-as 65035
update-source Loopback0
address-family ipv4 labeled-unicast
next-hop-self
!
address-family vpnv4 unicast
next-hop-self
!
address-family ipv6 labeled-unicast
next-hop-self
!
address-family vpnv6 unicast
next-hop-self
!
!
neighbor 1.3.4.4
remote-as 65046
address-family ipv4 labeled-unicast
next-hop-self
!
address-family vpnv4 unicast
next-hop-self
!
address-family ipv6 labeled-unicast
next-hop-self
!
address-family vpnv6 unicast
next-hop-self
!
!
vrf SQUARE
rd 4:13
address-family ipv4 unicast
redistribute ospf 1
!
address-family ipv6 unicast
redistribute ospfv3 1
!
!
!
router static
address-family ipv4 unicast
1.3.4.4/32 GigabitEthernet0/0/0/1
!
!
Hi CCIESP,
Thank so much for sharing. Please confirm whats mvpn profile was use on question 1.5 ?
The yellow service provider must be transit for this multicast flow. Enbale multicast VPN for IPv4 multicast traffic based on these parameters for SQUARE-CE11 and SQUARE-CE14.
a. P2MP MDT
b. BGP auto-discovery
c. Use PIM as the multicast protocol between customer nd service provider
d. Use up to 100 data MDT
Hi CCIESP,
That is great you came back again for CFG2+, Please update the solution from our member in the forum to Post one.
Thanks,
IC Admin.
Thankkkkkk
Thank so much for sharing.
what's the password?