Passed TS1, Diag H1+, H2 CFG.

First of all, I want to thanks C4C for the great support and materials.

I got TS1, Diag H1+, H2 CFG.
Here is my feedback:

T1: Vlan 12 on SW2
no passive int on SW1

T2: Fix the pool on R12 and add the ppp ipcp route def to R17
T3: remove the ip os cost on R12 int e 2/0
remove the acl on R3
T4: remove the passive-int on R14 e1/0, 0/0
fix the eigrp network statement uder R12
T5: Simply just added the Maximum-path 2 into the R12 BGP Process
T6: Fix the ACL on R25 to not deny TCP any any
Add the Next-Hop routemap to R22
T7: Added the ip nhrp redirect on R15
Fix the crypto on R17
add the ip nhrp shortcut on R18/19
YOU NEED TO ADD THE no ip spli horizon eigrp 200 under tun 0 of R15--->> otherwise traffic goes to defaut route since R19 does not have the route to PC 108

T8: Fix the R7/R3/R4 as follw:
fixed the NAT config, add the default-information originate under BGP
import the route-tagets of 65100:101 and 102 in the vrf
added the ip ospf cost of 1000 to interface e 2/0 of R4/6
fixed the NAT config of R8 for backup path
advertise the network of e0/0.125 in R3

T9:

The issue was in the crypto config of R24 and ospf network type of R7 tunnel interface

T10
fix the DHCP for NAS, and configure the DNS on the R23


DIAG same as WB

CFG

Everything was the same as WB. you just need to check the precofigs since there are a lot of configs there and then tweak them. In the question it asked clearly to remove 65006 and add 65001 in the jacobs network. Rest was the same. I did not configure the DHCP snooping since the R101 pings stops working. I did all the work arounds but still had issues.


Thanks and Good luck Everyone.