Guys,
I passed my exam a few days ago.
I got TS1 / Diag H2+ / CFG H2+
TS1
1. wrong client-identifier on R8
2. wrong IP addresses on R12's pool
3. wrong subnet mask on int e2/0 on R22
4. acl deny 145.14.14.14 on R14 (distribute-list)
5. no next-hop-self on R22
6. R25 is advertising worn LAN subnet
7. autherntication key is worng on R19
8. no default-originate on neighbor 123.45.67.21 on R7
9. no tunnel protection ipsec profile on R24
10. duplicate ip add on R24 that conflicts to NAS
================================================== =============
Diag H2+
same as the WB
================================================== =============
CFG H2+
1.1
snmp-server is not required
access vlans are pre-configured to the interface
others same as the WB
1.2
e1/0 - 1 , e2/0 - 1 are in vlan 999
others same as the WB
1.3 s
same as the WB
1.4
same as th WB
2.1
OSPF is preconfigured exept on R17 and R18
others same as the WB
2.2
vrf is preconfigured in the interface
others same as the WB
2.3
same as the WB
2.4
some of the OSPF and BGP peers are preconfigured
others same as the WB
2.5
same as the WB
2.6
deny advertisement of 172.0.0.0/8 on R55 and R56
others same as the WB
2.7
same as the WB
2.8
same as the WB
2.9
vlan 100 should not participate int he neighbor peering
others same as the WB
2.10
same as the WB
2.11
same as the WB
3.1
crypto is preconfigured. just add it to the tunnel
others same as the WB
3.2
mpls ip is preconfigured on all the required interfaces.
others same as the WB
3.3
same as the WB
3.4
same as the WB
4.1
don't use the deny on the ACL
4.2
skipped
5.1 - 5.4
same as the WB