spillo3000 (04-08-2019)
I updated the solution H3 in this link, you can download it
**Hidden Content: Thanks to see the content**
aaa1234567 (01-06-2019) , abanalaccie (06-02-2018) , alex (06-13-2019) , aliomdur90 (06-04-2018) , asa3rgcrgc (07-01-2018) , aures (05-15-2019) , axel123321 (01-12-2020) , balnazar3 (06-01-2019) , BarryDavidson (01-27-2019) , BGP123 (10-23-2018) , cciecandidate (07-04-2018) , cciedream1 (05-13-2018) , cciej (02-11-2020) , cciemaster01 (05-02-2019) , ccierscisco (04-21-2018) , cciezy (04-23-2018) , ccipcisco (04-23-2018) , Dave (04-26-2018) , diespongebob33 (06-13-2018) , dinurko (06-15-2019) , freebsd321 (05-22-2018) , Geronimo (05-01-2018) , GuiltyVerdict (08-06-2018) , heavenix (11-26-2018) , jeffval8 (05-03-2018) , jodassii (09-28-2018) , jpfu02 (09-24-2018) , jumarldomingo (08-04-2018) , kalu (05-09-2018) , kkkttt (06-23-2019) , leocf85 (04-30-2018) , maan4 (09-28-2018) , marsooq (05-12-2018) , misiekk (07-02-2018) , orofar (08-10-2019) , paddyk1 (06-27-2018) , paganfci (10-03-2018) , rachrach1008@gmail.com (12-27-2019) , Robin (04-21-2018) , samrang83 (06-03-2018) , satttpaing (11-07-2019) , sayyod (01-07-2019) , shadowmaster (04-22-2018) , siteoforigin (09-17-2018) , skndmx (06-30-2018) , sm_ccie (03-01-2020) , spillo3000 (04-08-2019) , Tiger (11-20-2018) , yakfu (05-31-2018) , yiya (04-21-2018) , zedlennon (11-21-2018) , Zynof (11-07-2019)
In this solution,it still can't match the cisco require multicast output
Robin (04-22-2018)
Hi guys,
Thanks for the solution of Section 2.10
Anybody has the solution of Section 2.11?
Many thanks.
That is my solution of section 2.11:
R30/R31/SW300/ SW301
ip multicast-routing
ip pim autorp listener
ip host DC1-RP 10.250.250.250
ip host HQ-RP 10.3.250.250
SW111
int vlan 2001
ip igmp join-group 239.130.1.1
SW100
router bgp 65001
network 10.1.113.0 mask 255.255.255.252
SW300
int vlan 2000
ip igmp join-group 239.250.1.1
ip igmp join-group 239.130.1.1
R30
access-list 1 permit 239.130.0.0 0.0.255.255
ip pim send-rp-ann loopback1 scope 1 group-list 1
ip pim send-rp-dis loopback1 scope 2
R30/R31
access-list 2 deny 239.130.0.0 0.0.255.255
access-list 2 permit any
!
int eth 0/0
ip multicast boundary 2 filter-autorp
personally I found, there is a problem in the solution suggested. Nowhere it is mentioned how the RP of the HQ(10.3.250.250) will communicate with RP of DC1(10.250.250.250). I used msdp inter-as peering between them and got expected result.
But I am not sure about the mapping-agent command and how it will work ?
The link is dead, can you reupload?
Can anybody upload the file again please ?